928 Motorsports, LLC ®
 
 

     
     
     
928 Motorsports
r o a d   m a p
928 Motorsports

928 Motorsports
m u l t i m e d i a
928 Motorsports
928 Motorsports 928 Motorsports

t r a c k   t i m e

 

 

Bilstein / Hypercoil Sport Suspension for the Porsche® 928


Thanks again Ė Iíve shopped with you many times and my car has improved every time. The Bilsteins from 2013 have really worked out well and the hood liner from last summer popped in with only about 2 hoursí effort and it makes the under-hood look brand new. It would be all but impossible to run a 928 without your help. Chris L.

I received my order and was able to install everything today (with the help of my local mecanic). I am very satisfied and can finally enjoy my suspension without the awfull noise from before. Thanks! Jean-Francois B.

A complete set of 4 performance springs, Bilstein gas shocks and spring perch adapters for the Porsche® 928

Application: 1978-95 Porsche® 928

Kit Includes:
  • 2 Front Bilstein gas shock absorbers
  • 2 Rear Bilstein gas shock absorbers
  • 2 Front Hypercoil® brand performance racing springs
  • 2 Rear Hypercoil® brand performance racing springs
  • 2 Front Hard-anodized billet aluminum 928 Spring perch adapters
  • 2 Rear Hard-anodized billet aluminum 928 Spring perch adapters
  • 2-billet aluminum spring spacers
  • 1 Ride height spanner wrench

Separately, these items sell for $2,079.00 This kit will save you $200.00.

Our spring perch adapters will allow you to put any 2.5" OD racing springs into your Porsche® 928 - and here are the benefits of doing this:
  • Lower unsprung weight
  • More clearance for larger tire/wheel combinations
  • Better selection of spring rates

Our spring kits accept all 2.5" OD springs The 928 Motorsports Spring Adapter kit comes with one set of 4 premium-quality Hypercoil® springs with it - but in the future you can use any brand of 2.5" springs you can get anywhere, or come back to us for another set of Hypercoils!

Your first kit is Your Choice We will consult with you as to the kind of driving/racing you are doing and help you select the best spring rates for your car and kind of event. No stock formulas - a spring selection based on YOUR needs.

Easy Installation Our kits come with everything you need to do the complete installation yourself. Instructions included. No modifications are necessary to the car whatsoever. Completely reversible if desired later. Designed to work with both Bilsteins and Koni's.

Easy Adjustments Because our threaded sleeves are new and anodized for anti-corrosion and toughness, adjusting the ride height of your 928 will always be easy from now on with the special spanner wrench included in this kit!

Top Technology! 928 Motorsports is proud to be a Hypercoil® dealer. We selected Hypercoil® (proudly made in the USA) because Hypercoils are manufactured from the highest quality chrome silicone steel and high tensile chrome silicone steel available in the world. Hypercoils are designed to be as light as possible with maximum deflection and at the same time endure the stresses of the extreme conditions common to motor racing. Hypercoils will resist taking a "set" longer than most springs. All Hypercoils are powder-coated a navy blue, the mean spring rate is etched into the end coil.

Spring Selection:
  • There are 21 Front spring weights to choose from, in 50 lb/in increments from 200 lb/in to 850 lb/in and 1000 lb/in
  • There are 25 Rear spring weights to choose from: 110 lb/in to 500 lb/in in 25 lb increments; and from 550 lb/in to 850 lb/in by 50 lb/in increments
  • Now you can get serious about dialing in your 928 suspension!
  • The perfect compliment to our lightweight, Ultimate 32mm front sway bar!

928 Motorsports has the best Service and Support around - answers to your questions when you need them through at (920) 485-0928.

Warranty: These are factory NEW springs and are warranted direct to you. Hypercoils are guaranteed for life to the original purchaser with proof of purchase. The warranty guarantees that the coils will remain within two percent of the original manufacturing tolerances for rate and free length when properly cared for & used in normal racing conditions. The spring perch adapter plates are manufactured by 928 Motorsports LLC and are warranted to be free from defects in materials and workmanship for 2 years from date of purchase. Racing does NOT void the warranty. That's what they are for!

Shipping: $48.50 in S&H for the 48 contiguous states and will be shipped UPS insured. Additional shipping fees apply for International.


Item

Options

Price (USD)

Shipping*

Availability

Bilstein / Hypercoil Sport Suspension for the Porsche® 928

$1,865.00

$48.50

Call for Availability

 

* Domestic US shipping shown. International shipping will be calculated based on location.

 
   
       

Phone: (920) 485-0928
Email: info@928motorsports.com

© 928 Motorsports, LLC - All Rights Reserved
Horicon, Wisconsin USA

928Motorsports.com - Performance Parts for your Porsche® 928